STAT-A-FLEX® Signal Wire Sealants
STAT-A-FLEX® is a two part polyester resin sealant especially formulated for encapsulating and sealing electrical signal wire in any road surface. STAT-A-FLEX® is easily applied, cures quickly and produces a tough weather and chemical resistant seal.

STAT-A-FLEX® provides maximum protection of all embedded signal wire such as, traffic loop detectors, electrical signal wire and data / communication cable.

• STAT-A-FLEX® is a self leveling liquid that requires no special equipment, just mix and pour.
• STAT-A-FLEX® cures tack free in less than 20 minutes under most weather conditions.
• STAT-A-FLEX® produces a total encapsulation of the signal wire in a saw cut.
• STAT-A-FLEX® has sufficient strength to withstand stresses due to normal traffic vibrations and differences in expansion and contraction due to temperature changes.
• STAT-A-FLEX® is resistant to most chemicals and solvents including road salts, acids, hydrocarbons, brake fluids, oils, gasoline and jet fuel.
• STAT-A-FLEX® is approved for use across the country and in U.S. territories by the Federal DOT and most state DOT’s for public roadway applications.
• STAT-A-FLEX® is approved for use by the Federal Aviation Administration (FAA) to encapsulate and protect signal wire and electrical lighting devices on airport runways.
• STAT-A-FLEX® is available in 1GL, 3.5GL, 5GL and 55GL quantities.

STAT-A-FLEX Calculator

Input your sawcut dimensions in order to calculate the number of gallons of sealant required. Use the units of measurement indicated on each column.

Saw Cut Depth (Inches)
Saw Cut Width (Inches)
Saw Cut Length (Feet)
Gallons Required
Sealants
Product NameDescription
STAT-A-FLEX®Signal wire sealant for encapsulating electronic signal wire and devices.
STAT-A-FLEX® DFSignal Wire Sealant, Drum Formula
Tools and Accessories
Product NameDescription
AcceleratorPre-mixed, pre-measured accelerator for STAT-A-FLEX Signal Wire Sealant
Power Mixing BladeFits all 3/8 inch drills - 3 � inch Impeller
Slot Filling SqueegeeFor properly filling and sealing traffic loops
Squeegee Replacement BladeReplacement blade for slot filling squeegee
STAT-A-FLEX® Hardener (MEKP)Methyl Ethyl Ketone Peroxide (MEKP) Hardener
Apparel and Safety Equipment
Product NameDescription
Cotton Heavyweight Gloves (XL)Pair
Latex Gloves (XL)Box of 100
Reflective Traffic Safety VestsSV125 Level 2
Safety GlassesEach
STAT-A-FLEX T-Shirts100 % Heavyweight Cotton Safety Orange T-Shirts


STAT-A-FLEX Signal Wire Sealant has been used to help illuminate and keep traffic flowing on bridges across the country, including New York State's George Washington Bridge.


Traffic signals are protected from roadway salts, chemicals and oils with STAT-A-FLEX SIgnal Wire Sealant.


Roadway system engineers specify STAT-A-FLEX Signal WIre Sealants when reliability counts.



© Copyright Durant Performance Coatings, Inc., All Rights ReservedHomeContact UsTerms and Conditions