DUR-A-PLEX® Ultra 81352-T1

Conforms to Mil-PRF-81352C Type I Military specification coating that conforms to Mil-PRF-81352C, Type I. Used for aircraft touch-up applications by the US Navy and Air Force. Contact your Durant Performance Coatings representative for technical information regarding this product.

Finish: 
Low Sheen
SKU: DP81352T1ULTRA
Associated NSNs: 
View Associated NSNs
Technical Specifications
Solvent Type: 
Water or Mil-T-81772
VOC: 
< 340 g/L (2.84 lbs/GL)
Flash Point: 
N/A
Solids by Volume: 
37.60%
Weight Per Gallon: 
9.99
Recommended Dry Film: 
2.0 dry mil
Theoretical Coverage: 
Theoretical coverage at one mil dry = 576 square feet (estimate does not include normal material losses during mixing and application process).
Viscosity: 
85-95 KU
Average Dry Time: 
60 min tack free
Reducer: 
Water or Mil-T-81772
Suggested Clean Up: 
Water or Mil-T-81772
Shelf Life: 
12 Months
Instructions
Application Method: 
Brush, Roller or Spray. NOTE: Do not apply if material, substrate or ambient temperature is below 45ºF(7ºC) or above 95ºF(35ºC). Best if relative humidity is below 80%.
Surface Preparation: 
Remove all loose dirt, rust, oil, grease, excess moisture and other foreign matter.
Mixing: 
Stir until thoroughly homogenized
Cautions: 
Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air or water. respiratory protection (NIOSH approved) or leave the area. Adequate ventilation required when sanding or abrading the dried film. If adequate ventilation cannot be provided wear an approved particulate respirator (NIOSH approved). Follow respirator manufacturer's directions for respirator use. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage.
First Aid: 
In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.